- Yes, enter setup mode by pressing the power button for 5 seconds and configure it to the new Wi-Fi network using the app.
How do I factory reset the SMART Plug?
- Press and hold the power button for 10 seconds until the LED blinks rapidly.
How do I configure the SMART Plug?
- Plug in the SMART Plug and press the power button for 5 seconds until the LED starts blinking. Follow the steps in the app to configure it.
How do I distinguish between different sensors in a room?
- Assign unique names to each sensor in the app. Color coding is also used: each sensor in a room has a unique color dot next to its icon in the app.
How do I factory reset the sensors?
Press and hold the reset button on the sensor for 10 seconds to factory reset it.
How do I configure the sensors?
- Go to Settings > Devices > (Select Device) > Configure Sensors and follow the steps shown in the app.
I see no Wi-Fi and want to reconfigure my device to connect to a new Wi-Fi network. How can I do it?
- Tap twice on the reset button to enter setup mode and follow the configuration instructions in the mobile app.
How do I configure the smart MCB?
Follow the steps mentioned below to configure the Smart MCB:
- Open the automation app.
- Go to ‘Settings’
- Tap on ‘Devices’
- Click on ‘+’ to add devices.
- Search for Smart MCB and tap on the device
- Scan the QR code available on operating manual or type the Device ID
- Connect with the device Wi-Fi – ‘smart_mcb_*******’
- Ensure that you are using Wi-Fi to configure the device, not mobile Data
- Click on ‘I’m connected to – smart_mcb_*******’
- Click on Next
- Connect with Wi-Fi and type in the password
- Click on ‘Okay’ and “Confirm Password’
- Configuration is Done!
- Now Assign the device to a room or add a room.
- Name the device as per convenience.
- Click on ‘Create Device’
- Your device is now successfully added!
- Click on ‘Okay’
- Go to ‘Devices’
- Click on the room
- You will find a switch of the Smart MCB that is connected to the appliances present in the household.
- Tap on the virtual button to switch on/off the appliances
How do I configure Retrofit modules?
- After installing the device within the switchboard, download the automation app from the app store and create an account. Create a room for the device (where it is located), then go to Settings > Devices > (Select Device Type) and configure the device according to the steps mentioned on the screen.
What should I do if device configuration fails?
- If device configuration fails, reset the device according to the instructions in the operating manual and reconfigure it.